ERR 10 — sensor cleaning required (JOWA SEAGUARD): što učiniti?

Q: ERR 10 — sensor cleaning required (JOWA SEAGUARD): što učiniti?

Uzrok: No clean water, dirty sensor, failed auto-flush, air bubbles, faulty sensor. Što učiniti: Check the clean water supply, clean the sensor and repeat the flush, check the water, replace the sensor

ERR 10 — sensor cleaning required

JOWA SEAGUARD, alarm kaljuže 15 ppm (ows monitor)

Mogući uzrok

No clean water, dirty sensor, failed auto-flush, air bubbles, faulty sensor

Što učiniti

Check the clean water supply, clean the sensor and repeat the flush, check the water, replace the sensor

Priručnik proizvođača, str. 22

Pogledajte sklop na 3D modelu

Ostali kvarovi JOWA SEAGUARD

ERR 2 — clock failureHardware failure ERR 4 — memory errorMemory card loose or faulty (corroded contacts)ERR 8 — sensor not connectedBroken/loose cable or faulty sensor ERR 20 — sensor temperatureTemperature outside +1…+60 °C or faulty sensor ERR 40 — log truncatedLog recording interrupted by power failure ERR 80 — unknown errorSoftware failure or no ID in the Information menu PPM: O/R — out of rangeValue outside 0–30 ppm, sample too dirty, faulty sensor

Prema priručniku proizvođača „Manual JOWA SEAGUARD”. Prije rada provjerite izvornik na brodu.

Stranica je automatski prevedena. Brojevi dijelova, kôdovi i stranice su kao u izvorniku.