High vibration or noise
Tanabe TASK, kompresor sekrup injeksi oli dalam kabinet
Kemungkinan penyebab
Worn mounting rubbers, loose bolts, bearing damage
Yang harus dilakukan
Manual produsen, hlm. 37Replace rubbers, retighten, replace bearings
Gangguan Tanabe TASK lainnya
Does not start or stops at onceControl panel fault, low voltage, thermal relay trippedAir receiver safety valve blowsUnloader pressure switch, unloader valve or solenoid faultSeparator safety valve blows (high oil pressure)Clogged separator cartridge, minimum pressure valve faultPressure does not rise (stays unloaded)Pressure switch, solenoid or unloader seal ring faultOverheat tripDirty cooler, low oil, fan stopped, blocked intake, thermo valve faultOil flows back to suction filter at stopUnloader solenoid fault or stop delay relay wrongHigh oil content in airClogged separator cartridge, blocked return line, overfilling
Dari manual produsen “EM-20-3 INSTRUCTION MANUAL FOR AIR COMPRESSOR”. Periksa dokumen asli di kapal sebelum bekerja.
Halaman ini diterjemahkan otomatis. Nomor suku cadang, kode, dan halaman sesuai aslinya.