Fault 7.0 — High ppm
JOWA OIL-A TRIOSEP, bilge water separator (ows) with 15 ppm alarm
Possible cause
15 ppm alarm indicates exceedance
What to do
Manufacturer's manual, p. 16Clean sensor, backwash filters, then press red pushbutton-lamp
See the assembly on the 3D model
Other JOWA OIL-A TRIOSEP faults
Fault 5.0 — High currentPump motor overloadFault 6.0 — Flow failureNo signal from flow relay while pump is runningPump stopped, oil level faultOil level sensor in Tank 1 did not reset within 5–30 s
From the manufacturer's manual “triosepspecial ver 2”. Check against the original on board before work.
This page was translated automatically from the manual summary. Part numbers, codes and page numbers are as in the original.